Cambiar idioma a windows vista

[dogduck]

ACABO DE ADQUIRIR UNA LAPTO DE USA VAIO Y QUIERO CAMBIAR EL SISTEMA OPERATIVO POR QUE TENGO WINDOWS VISTA POR WINDOWS XP.

Dirígete a la url del fabricante y sigue los pasos que te indican:
Por ejemplo para el modelo VAIO model name is VGN-TZ11XN/B

(No eliminar nunca la partición oculta de unos 7GB, es donde está el Sw de recuperación y la posibilidad de restaurar el vista)

A.- Bajarse los drivers para XP:
http://support.vaio.sony.co.uk/os/xp...voe_en_GB_cons

B.- Procedimiento según el fabricante:
http://support.vaio.sony.co.uk/downl...de_TZ1-TZ2.htm

XP drivers install instructions for the VGN-TZ series.
1) Please makes sure that :
a. The unit is connected on AC power
b. The Wireless switch on the front side of the unit is switched on.
c. No 3rd party hardware is connected / installed on the unit when starting this process.

2) Install Windows XP Professional with SP2
! Important notes :
a. In case you still would like to recover using F10 from the hard disk to the original Vista preinstalled operating system, please leave the recovery partition in tact.
b. In case you would like to free up some space and remove the recovery partition, please make sure to first create a set of recovery discs using the Recovery wizard in your Vista preinstalled installation.
c. We recommend to quick format the partition you wish to install Windows XP on to avoid conflicts with the preinstalled OS.

3) Bios Update : Please first install the provided BIOS update to enable all features.
Go to the downloaded Drivers folder and open the BIOS folder. Run the install file from there and wait until the process is finished.
! Important notes :
a. Do not interrupt the process.
b. Do not touch the Vaio during this process
c. Shut the PC down when requested or let it shut down by itself and reboot after 5 seconds

4) Open the downloaded Drivers folder. Then open the Chipset folder to run the setup. Follow the on-screen instructions, when the setup is completed, press finish to restart the PC

5) Audio driver installation :
a. After the reboot, open the Drivers folder, then the audio folder, open folder 1 and run the “KB835221 – Audio hotfix” file and follow the install instructions.
b. 2 Found new hardware dialogs will pop up. Press cancel on these screens
c. Press finish on the KB835221 setup wizard screen
d. Go back out of folder 1 and open folder 2
e. Run the setup file in this folder. Follow the on-screen instructions.
f. Restart the system when prompted to.

6) A Found new hardware dialog will appear after the reboot (Modem installation).
a. Select No, not this time and press next
b. It will want to install a Modem device. Select “Install from a list of specific location” and press next
c. Select “Search for the best driver in these locations”
d. Deselect “Search removable media”
e. Select “include this location in the search”. Press on browse and browse to the modem folder in the Drivers folder and press OK
f. Click on next to continue
g. A Pop-up will appear, please press on “Continue Anyway”
h. Press on Finish to complete the installation

7) Bluetooth installation :
a. Open the Drivers folder and open the Bluetooth folder
b. Run the setup program. Follow the on-screen instructions
c. Reboot the PC when requested at the end of the installation
d. After the reboot you might hear some sounds, this is from installing further Bluetooth components, please ignore this.

8) Graphics installation :
a) Go to Start > Control Panel
b) Select Switch to classic view
c) Double click on “System”
d) Click on the tab Hardware and press on Device manager
e) In the List with ? Other devices, right-click on the Video Controller (VGA compatible) and select update driver
f) Select “No, Not this time” and press Next
g) Select “Install from a list or specific location” and press Next
h) Deselect “Search removable media”
i) Select “include this location in the search”. Press on browse and browse to the Drivers folder and then to the Video folder and press OK
j) Press Next
The screen can flash a couple of times during the installation, this is normal. Wait until the setup is completed and press Finish at the end of the install. Do not click any other screens during the installation! Restart the PC when done.


9) Wireless LAN drivers installation:
a. Browse to the folder Drivers and then WirelessLAN
b. Double click on the iProInst icon to start the setup
c. Select Install Software
d. Select, after licence Agreement, “Typical” and press Next
e. Press Ok on the “Install default components?”
f. Press Ok when the install is completed

Other drivers installations :

Open the Device manager :
g. Go to Start > Control Panel
h. Double click on “System”
i. Click on the Hardware tab and click on “Device Manager”

10) Network controller driver installation:
a. Right click on the Ethernet Controller item under Other devices and select Update driver
b. Select “No, not this time” and press Next
c. Select “Install from a specific location” and press Next
d. Click on Browse and browse to the Drivers folder and select there the Network folder and press Ok
e. Click on Next
f. Click on Finish when done

11) Mass Storage controller (Memory Stick):
a. Right click on the first Base system device item under Other devices and select Update driver
b. Select “No, not this time” and press Next
c. Select “Install from a specific location” and press Next
d. Click on Browse and browse to the Drivers folder and select there the Memory Stick folder and press Ok
e. Click on Next
f. Click on Finish when done
g. Open the drivers folder, open the Memory Stick folder
h. Open the Icon folder
i. Run the install file
> This will open a black screen for a split second and that concludes the installation.

12) Mass Storage controller (SD cards):
a. Right click on the second Base system device item under Other devices and select Update driver
b. Select “No, not this time” and press Next
c. Select “Install from a specific location” and press Next
d. Click on Browse and browse to the Drivers folder and select there the SD card driver folder and press Ok
e. Click on Next
f. Click on Finish when done
g. Restart the PC

13) Touchpad driver :
a. Go to Start > Control Panel
b. Double click on “System”
c. Click on the Hardware tab and click on “Device Manager”
d. Click on the + before Mice and other pointing devices
e. Right click on the PS/2 Compatible mouse item and select Update driver
f. Select “No, not this time” and press Next
g. Select “Install from a specific location” and press Next
h. Click on Browse and browse to the Drivers folder and select there the Pointing folder and press Ok
i. Click on Next
j. Click on Finish when done
k. Restart the PC


14) Notebook control driver installation :
a. Go to Start > Control Panel
b. Double click on “System”
c. Click on the Hardware tab and click on “Device Manager”
d. Click on the + before Human interface devices
e. Right click on “Sony Notebook Interface Device” and select Update driver
f. Select in the Wizard “No, not this time” and press Next
g. Select “Install from a list or a specific location” and press Next
h. Select “Don’t search, I will choose the driver to install” and press Next
i. Press on “Have Disk…”
j. Browse to the folder Drivers and then SonyNC and press Open
k. Click on the file SonyNC and press Open
l. Click on OK
m. Press Finish.

15) Notebook I/O driver installation :
a. Go to Start > Control Panel
b. Double click on “System”
c. Click on the Hardware tab and click on “Device Manager”
d. Click on the + before Human interface devices
e. Right click on “Sony Programmable I/O interface Device” and select Update driver
f. Select in the Wizard “No, not this time” and press Next
g. Select “Install from a list or a specific location” and press Next
h. Select “Don’t search, I will choose the driver to install” and press Next
i. Press on “Have Disk…”
j. Browse to the folder Drivers and then Sony_PI and press Open
k. Click on the file SonyPI and press Open
l. Click on OK
m. Press Finish.


16) Camera driver installation (for the models equipped with a integrated camera):
a. Go to Start > Control Panel
b. Double click on “System”
c. Click on the Hardware tab and click on “Device Manager”
d. Click on the + before Universal Serial Bus controllers
e. Right click on “USB Composite Device” and select Update driver
f. Select in the Wizard “No, not this time” and press Next
g. Select “Install from a list or a specific location” and press Next
h. Select “Don’t search, I will choose the driver to install” and press Next
i. Press on “Have Disk…”
j. Browse to the folder Drivers and then Camera and press Open
k. Press Finish when done.

17) TPM module installation (if your Vaio has this installed)
a. Right click on the Unknown device item under Other devices and select Update driver
b. Select “No, not this time” and press Next
c. Select “Install from a specific location” and press Next
d. Click on Browse and browse to the Drivers folder and select there the TPM folder and press Ok
e. Click on Next
Click on Finish when done

18) If you have fingerprint recognition, please go to the drivers folder and open the Fingerprint driver folder and run the Setup file.

19) When the windows XP setup is completed enter windows and go to the downloaded applications folder
...
...

salu2