Desbloqueo de Cisco ATA 186

[wpalomo]

Saludos.

Si todavia te sirve, esta es la informacion

STEP 1
You may first want to reset your unit to factory default setting. To do this, pick up the phone handset attached to the Line 1 jack and press the illuminated red button.

Dial: 322873738#

then dial * (asterisk) and hang up.

NOTE: this will completely reset the unit to factory default settings, erasing any values that may already exist!

STEP 2
Now, again pick up the phone handset and press the red button, then

Dial: 21 #

and you will be told the IP address of your device (e.g. 192.168.0.100).

STEP 3
Go to any browser equipped computer on your network and enter the address:

http://<IP ADDRESS>/dev

(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1.)


STEP 4
You need to modify only a few parameters from the factory default. They are listed here:

UID0 Enter the phone number you chose when you signed up for InPhonex service.
PWD0 Enter the password that you chose when you signed up for InPhonex service.
GkOrProxy sip.inphonex.com
SIPRegInterval 3600
SIPRegOn 1
DisplayName0 Enter your full name. This will show up as part of your caller id.