Foros del Web » Administración de Sistemas » LAMP »

WampServer 2 Puerto 3306 AYUDA!!!

Estas en el tema de WampServer 2 Puerto 3306 AYUDA!!! en el foro de LAMP en Foros del Web. Hola a todos, Instale WampServer 2 y todo funciona OK, el único problema es que necesito entrar remotamente desde la misma LAN a mysql mediante ...
  #1 (permalink)  
Antiguo 26/01/2011, 20:52
 
Fecha de Ingreso: enero-2011
Ubicación: Mexico
Mensajes: 3
Antigüedad: 13 años, 2 meses
Puntos: 0
WampServer 2 Puerto 3306 AYUDA!!!

Hola a todos,

Instale WampServer 2 y todo funciona OK, el único problema es que necesito entrar remotamente desde la misma LAN a mysql mediante un programa llamado Navicat, ya intente todo tipo de configuración incluyendo el parámetro bind-address = 0.0.0.0, instale XAMPP y haciendo unos cambios si me permite conectarme al puerto 3306 de mysql para administrar las bases de datos.

Si alguien sabe la forma de poder solucionar esto, mucho agradeceria su valiosa ayuda.

Saludos
  #2 (permalink)  
Antiguo 27/01/2011, 05:21
Avatar de hyperwin  
Fecha de Ingreso: agosto-2010
Mensajes: 1.290
Antigüedad: 13 años, 7 meses
Puntos: 68
Respuesta: WampServer 2 Puerto 3306 AYUDA!!!

Qué error te muestra al intentar conectarse a Mysql?

Tienes abierto el puerto 3306 en el firewall?
MySQL está configurado para permitir conexiones remotas?
__________________
Administrador de Servidores Windows
www.hyperwin.net
WebSitePanel - Helm Control - HostingController - DotNetPanel
Instalación - Configuración - Hardening - Solución de problemas
  #3 (permalink)  
Antiguo 27/01/2011, 09:55
 
Fecha de Ingreso: enero-2011
Ubicación: Mexico
Mensajes: 3
Antigüedad: 13 años, 2 meses
Puntos: 0
Respuesta: WampServer 2 Puerto 3306 AYUDA!!!

Hola HyperWin

Gracias por tu interes en ayudarme con este asunto, El Firewall esta desactivado y revisando el LOG de MySql me registra lo siguiente:

**
Version: '5.5.8-log' socket: '' port: 3306 MySQL Community Server (GPL)
110126 21:38:18 [Warning] IP address '192.168.0.115' could not be resolved: getnameinfo() returned error (code: 11004).
**

Lo que creo que esta pasando es que MySql no permite conexiones que no sean de localhost o 127.0.0.1, según esto se resuelve creando un usuario por ej: root, % y con todos los privilegios para que puedas acceder a la estructura de las bases de datos desde cualquier IP, pero por una extraña razón WampServer no me lo permite.

Si instalo XAMPP y creo este usuario y pongo el parámetro "bind-address = 0.0.0.0" en my.ini se resuelve el problema, realmente prefiero usar WampServer y esa es la causa por la cual requiero ayuda de personas como ustedes que tienen un mayor conocimiento en este ramo.

Espero mi explicación pueda servir para resolverlo.

Saludos
  #4 (permalink)  
Antiguo 27/01/2011, 10:05
Avatar de hyperwin  
Fecha de Ingreso: agosto-2010
Mensajes: 1.290
Antigüedad: 13 años, 7 meses
Puntos: 68
Respuesta: WampServer 2 Puerto 3306 AYUDA!!!

Por favor, pega aquí el my.ini completo, me parece que el problema está en skip-networking
__________________
Administrador de Servidores Windows
www.hyperwin.net
WebSitePanel - Helm Control - HostingController - DotNetPanel
Instalación - Configuración - Hardening - Solución de problemas
  #5 (permalink)  
Antiguo 27/01/2011, 11:43
 
Fecha de Ingreso: enero-2011
Ubicación: Mexico
Mensajes: 3
Antigüedad: 13 años, 2 meses
Puntos: 0
Respuesta: WampServer 2 Puerto 3306 AYUDA!!!

my.ini

INICIO MY.INI --->

# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is C:\mysql\data) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.

# The following options will be passed to all MySQL clients
[client]
#password = *******
port = 3306
socket = /tmp/mysql.sock

# Here follows entries for some specific programs

# The MySQL server
[wampmysqld]
bind-address = 0.0.0.0
port = 3306
socket = /tmp/mysql.sock
key_buffer = 16M
max_allowed_packet = 1M
table_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
basedir=c:/wamp/bin/mysql/mysql5.5.8
log-error=c:/wamp/logs/mysql.log
datadir=c:/wamp/bin/mysql/mysql5.5.8/data

# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking

# Disable Federated by default
skip-federated

# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin

# binary logging format - mixed recommended
binlog_format=mixed

# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1

# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port = <port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin

# Point the following paths to different dedicated disks
#tmpdir = /tmp/
#log-update = /path-to-dedicated-directory/hostname

# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = C:\mysql\data/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = C:\mysql\data/
#innodb_log_arch_dir = C:\mysql\data/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50

[mysqldump]
quick
max_allowed_packet = 16M

[mysql]
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates

[isamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[myisamchk]
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M

[mysqlhotcopy]
interactive-timeout

[mysqld]
port=3306

<---FIN MY.INI
  #6 (permalink)  
Antiguo 28/01/2011, 04:34
Avatar de hyperwin  
Fecha de Ingreso: agosto-2010
Mensajes: 1.290
Antigüedad: 13 años, 7 meses
Puntos: 68
Respuesta: WampServer 2 Puerto 3306 AYUDA!!!

El my.ini al parecer está correcto, después de hacar el cambio del bind reiniciaste el servicio de mysql?
__________________
Administrador de Servidores Windows
www.hyperwin.net
WebSitePanel - Helm Control - HostingController - DotNetPanel
Instalación - Configuración - Hardening - Solución de problemas
  #7 (permalink)  
Antiguo 12/05/2011, 13:07
Avatar de jhonmelguizo  
Fecha de Ingreso: enero-2008
Ubicación: Medellín - Colombia
Mensajes: 264
Antigüedad: 16 años, 2 meses
Puntos: 6
Exclamación Respuesta: WampServer 2 Puerto 3306 AYUDA!!!

Ya encontraron la solución?, tengo el mismo problema con MySQL 5.5 en una red local.

Saludos...
__________________
¡No competimos, compartimos!...
  #8 (permalink)  
Antiguo 13/05/2011, 08:08
Avatar de jhonmelguizo  
Fecha de Ingreso: enero-2008
Ubicación: Medellín - Colombia
Mensajes: 264
Antigüedad: 16 años, 2 meses
Puntos: 6
Información Respuesta: WampServer 2 Puerto 3306 AYUDA!!!

SOLUCIONADO:
Realmente lo que hice fue cambiar la versión de Mysql Server 5.5 a:

mysql-essential-6.0.10-alpha-win32 (Funciona)
mysql-essential-5.1.57-win32 (Funciona)

Probé estas dos versiones y en las dos pasa la configuración.

Saludos...
__________________
¡No competimos, compartimos!...

Etiquetas: puerto
Atención: Estás leyendo un tema que no tiene actividad desde hace más de 6 MESES, te recomendamos abrir un Nuevo tema en lugar de responder al actual.
Respuesta




La zona horaria es GMT -6. Ahora son las 09:01.