Arrancar Samba en Mandrake 10.2

[jglorenzosqr]

Creo que tengo un problema con la red Samba en Mandrake 10.2

El equipo está conectado a una intranet. Desde el equipo Se puede ver la red, pero la máquina no aparece en la misma.

Pienso que existe un inconveniente con la configuración de la red; ya que tiene configurada dos impresoras a las cuales no llega ningún archivo de impresión.

La máquina es una Compaq-HP Pentium4 de 256 MB.

[AleSanchez]

Postea el contenido de tu smb.conf.
¿Cual es el grupo de trabajo que utiliza esa red?
¿Que errores ves en los equipos clientes?
¿Que dicen los logs del samba y de cups?

[jglorenzosqr]

En que directorio del / de Mandrake se encuentra este archivo smb.conf?

En /etc/ no aparece

[jglorenzosqr]

Ya lo encontré en /etc/samba/smb.conf

This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]

# 1. Server Naming Options:
# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = MDKGROUP

# netbios name is the name you will see in "Network Neighbourhood",
# but defaults to your hostname
# netbios name = <name_of_this_server>

# server string is the equivalent of the NT Description field
server string = Samba Server %v

# Message command is run by samba when a "popup" message is sent to it.
# The example below is for use with LinPopUp:
; message command = /usr/bin/linpopup "%f" "%m" %s; rm %s

# 2. Printing Options:
# CHANGES TO ENABLE PRINTING ON ALL CUPS PRINTERS IN THE NETWORK
# (as cups is now used in linux-mandrake 7.2 by default)
# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = cups
load printers = yes

# printcap cache time, so samba will automatically load new cups printers
printcap cache time = 60

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx, cups
printing = cups

# Samba 2.2 supports the Windows NT-style point-and-print feature. To
# use this, you need to be able to upload print drivers to the samba
# server. The printer admins (or root) may install drivers onto samba.
# Note that this feature uses the print$ share, so you will need to
# enable it below.
# printer admin = @<group> <user>
printer admin = @adm
# This should work well for winbind:
# printer admin = @"Domain Admins"

# 3. Logging Options:
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
max log size = 50

# Set the log (verbosity) level (0 <= log level <= 10)
# log level = 3

# 4. Security and Domain Membership Options:
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page. Do not enable this if (tcp/ip) name resolution does
# not work for all the hosts in your network.
# hosts allow = 192.168.1. 192.168.2. 127.

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
# guest account = pcguest
# Allow users to map to guest:
map to guest = bad user

....

[jglorenzosqr]

Realizé lo siguientes cambios en smb.conf que faltaban :

workgroup = MDKGROUP

se cambio por :
workgroup = ZONA

# netbios name is the name you will see in "Network Neighbourhood",
# but defaults to your hostname
# netbios name = <name_of_this_server>

# server string is the equivalent of the NT Description field
server string = Samba Server %v

Se cambio por : server string = ATENCION

Reinicié :
# /etc/init.d/smb stop
# /etc/init.d/smb start

Reinicé la máquina, traté de imprimir, pero el equipo no recibió informacion de impresion.

[AleSanchez]

¿Mmm, esto tiene que ver con el otro post?
¿Seguis tratando de imprimir desde el mandrake a otro equipo?

[jglorenzosqr]

Iniciado por AleSanchez

¿Mmm, esto tiene que ver con el otro post?
¿Seguis tratando de imprimir desde el mandrake a otro equipo?

Disculpen que abri otro foro para esto. Descargué los .iso de Mandriva Free 2007.

Sino me da resultado con lo del samba, actualizaré a Mandriva 2007