Hola... fui a la página de LG España, para mayor fiabilidad, encontré la misma versión de firmware, te recomiendo usar ése...
Sigue las siguientes instrucciones para llegar al firmware puesto LGE España.
En tu navegador...
www.lge.es
- Click en soporte (arriba)
- Click Servicio LG
- Click Soporte de Producto
- Click Drivers (izquierda)
- Click Combo drives (medio)
- Elige tu modelo... click en New firmware (ver. 102) for only GCC-4480B(48X Combo Drive)
- Bájate el software... y sigue las instrucciones antes descritas.
Si andas liado con el inglés, me avisas...
Cita:
Iniciado por www.lge.es INICIO > Soporte de producto > Drivers
DRIVERS
Seleccione su tipo de producto en la lista de programas de instalacion de cada producto. Tambien puede encontrar el programa apropiado directamente al introducir su numero de modelo en la caja de texto.
Tema New firmware (ver. 102) for only GCC-4480B(48X Combo Drive)
Producto Combo Drive
O/S Windows 2000
Windows 98
Windows XP
Windows ME
Nombre del Archivo GCC-4480B102(EW).zip
New firmware (ver. 102) for only GCC-4480B(48X Combo Drive)
Improvement Point:
Enhanced the recording performance of 800MB CD-R media
Plese refer to the attached file.
¡Ø INSTRUCIONS
GCC-4480B Version 1.02 Firmware Update
To update the firmware of the GCC-4480B please refer to the following instructions:
Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.
This firmware update is for drives with original firmware versions below 101.
The drives must be original LG branded drives with the Combo Drive model number
GCC-4480B(no OEM units).
If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.
This firmware update is for use only on PC¡¯s with Windows XP, Windows 2000,
Windows Millennium Edition (ME), or Windows 98.
Critical Instructions: (to be followed carefully)
1. Connect the drive as ¡°master¡± by it self, on the secondary IDE controller
with no other device on the same IDE cable, making note to set the jumper
on the back of the drive to the ¡°master¡± position.
2. Download the file GCC-4480B102(EW).ZIP to a folder of your choice.
This download includes this ¡°Readme(ew)¡± text file, as well as the GCC-4480B102(E).EXE
program, which will auto-update your drive¡¯s firmware.
3. Close all other programs including: screen saver, anti virus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the update process,thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.
5. Go into the folder with the update file and double click the GCC-4480B102(E).EXE program.
Firmware upgrade will be automatically started.
When the UPGRADE is complete the screen should indicate FIRMWARE UPDATE SUCCESSFUL.
Re-boot your PC.
The update will be complete, after you reboot your system.
WARNING:
Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.
SaludoX...
SaludoX...