Estimados:
Alguno de uds me puede ver este script e indicarme donde esta mi error, ya que, solo muestra las dos priemrra interfaces y lueno no muestra nada mas.
Desde ya muy agradecido.
Rides
Este es mi script
# Created by
# /usr/bin/cfgmaker --community public --output /etc/mrtg.cfg localhost
### Global Config Options
# for Debian
WorkDir: /var/www/mrtg
### Global Defaults
# to get bits instead of bytes and graphs growing to the right
# Options[_]: growright, bits
# EnableIPv6: no
# Global Settings
RunAsDaemon: yes
EnableIPv6: no
WorkDir: /var/www/mrtg
Language: spanish
Options[_]: growright
WriteExpires: Yes
####desde aqui muestra#########
### Interface 2 >> Descr: 'eth0' | Name: '' | Ip: '' | Eth: '10-56-ba-c3-68-c2' ###
Target[localhost_2]: 2:public@localhost:
SetEnv[localhost_2]: MRTG_INT_IP="" MRTG_INT_DESCR="eth0"
MaxBytes1[localhost_2]: 2048
MaxBytes2[localhost_2]: 2048
Title[localhost_2]: Traffic Analysis for 2 -
PageTop[localhost_2]: <H1>Traffic Analysis for Eth0 -- </H1>
<TABLE>
<TR><TD>System:</TD> <TD> server(configure /etc/snmp/snmpd.local.conf)</TD></TR>
<TR><TD>Maintainer:</TD> <TD>Root <root@localhost> (configure /etc/snmp/snmpd.local.conf)</TD></TR>
<TR><TD>Description:</TD><TD>eth0 </TD></TR>
<TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR>
<TR><TD>ifName:</TD> <TD></TD></TR>
<TR><TD>Max Speed:</TD> <TD>1250.0 kBytes/s</TD></TR>
</TABLE>
### Interface 3 >> Descr: 'eth1' | Name: '' | Ip: '192.168.0.1' | Eth: '10-56-ba-c3-5d-81' ###
Target[localhost_3]: 3:public@localhost:
SetEnv[localhost_3]: MRTG_INT_IP="192.168.0.1" MRTG_INT_DESCR="eth1"
MaxBytes[localhost_3]: 12500000
Title[localhost_3]: Traffic Analysis for 3
PageTop[localhost_3]: <H1>Traffic Analysis for 192.168.1.1 -- </H1>
<TABLE>
<TR><TD>System:</TD> <TD> (configure /etc/snmp/snmpd.local.conf)</TD></TR>
<TR><TD>Maintainer:</TD> <TD>Root <root@localhost> (configure /etc/snmp/snmpd.local.conf)</TD></TR>
<TR><TD>Description:</TD><TD>eth1 </TD></TR>
<TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR>
<TR><TD>ifName:</TD> <TD></TD></TR>
<TR><TD>Max Speed:</TD> <TD>12.5 MBytes/s</TD></TR>
<TR><TD>Ip:</TD> <TD>192.168.1.1 (firewall.sananselmo)</TD></TR>
</TABLE>
###hasta aqui llega la muestra, hacia bajo no muestra nada######
### tambien probe descomentando todo y me dio el mismo resultado
### solo muestra lo primero de arriba
Target[admin]: '/var/admin'
SetEnv[admin]: MRTG_INT_IP="192.168.0.10" MRTG_INT_DESCR="Admin"
MaxBytes[admin]: 1250000
Title[admin]: Traffic Analysis for Admin
PageTop[admin]: <H1>Traffic Analysis for admin </H1>
<TABLE>
<TR><TD>System:</TD> <TD>mi server (configure /var/admin)</TD></TR>
<TR><TD>Maintainer:</TD> <TD> (configure /var/admin)</TD></TR>
<TR><TD>Description:</TD><TD>admin/TD></TR>
<TR><TD>ifType:</TD> <TD>softwareLoopback (24)</TD></TR>
<TR><TD>ifName:</TD> <TD></TD></TR>
<TR><TD>Max Speed:</TD> <TD>1250.0 kBytes/s</TD></TR>
<TR><TD>Ip:</TD> <TD>192.168.1.10 (mipc.midominio)</TD></TR>
</TABLE>
### Interface 4 >> Descr: 'ppp0' | Name: '' | Ip: 'ippublica' | Eth: '' ###
### The following interface is commented out because:
### * it is operationally DOWN
### * has a speed of 0 which makes no sense
#
# Target[localhost_4]: 4:public@localhost:
# SetEnv[localhost_4]: MRTG_INT_IP="ippublica" MRTG_INT_DESCR="ppp0"
# MaxBytes[localhost_4]: 0
# Title[localhost_4]: Traffic Analysis for 4 -- firewall
# PageTop[localhost_4]: <H1>Traffic Analysis for 4 </H1>
# <TABLE>
# <TR><TD>System:</TD> <TD>firewall in Unknown (configure /etc/snmp/snmpd.local.conf)</TD></TR>
# <TR><TD>Maintainer:</TD> <TD>Root <root@localhost> (configure /etc/snmp/snmpd.local.conf)</TD></TR>
# <TR><TD>Description:</TD><TD>ppp0 </TD></TR>
# <TR><TD>ifType:</TD> <TD>ppp (23)</TD></TR>
# <TR><TD>ifName:</TD> <TD></TD></TR>
# <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR>
# <TR><TD>Ip:</TD> <TD>ippublica (micta.proveedor)</TD></TR>
# </TABLE>
#
#LoadMIBs: /usr/share/snmp/mibs/UCD-SNMP-MIB.txt
#Target[localhost.cpu]:ssCpuRawUser.0&ssCpuRawUser.0:public@localhost + ssCpuRawSystem.0&
#ssCpuRawSystem.0:public@localhost + ssCpuRawNice.0&ssCpuRawNice.0:public@localhost
#RouterUptime[localhost.cpu]: public@localhost
#MaxBytes[localhost.cpu]: 100
#Title[localhost.cpu]: CPU Load
#PageTop[localhost.cpu]: Carga de CPU %
#Unscaled[localhost.cpu]: ymwd
#ShortLegend[localhost.cpu]: %
#YLegend[localhost.cpu]: Uso de CPU
#Legend1[localhost.cpu]: CPU Activa en % (Carga)
#Legend2[localhost.cpu]:
#Legend3[localhost.cpu]:
#Legend4[localhost.cpu]:
#LegendI[localhost.cpu]: Active
#LegendO[localhost.cpu]:
#Options[localhost.cpu]: growright,nopercent
#
#Memoria RAM:
#LoadMIBs: /usr/share/snmp/mibs/HOST-RESOURCES-MIB.txt
#Target[localhost.mem]: .1.3.6.1.4.1.2021.4.6.0&.1.3.6.1.4.1.2021.4.6.0:pu blic@localhost
#PageTop[localhost.mem]: Memoria RAM
#Options[localhost.mem]: nopercent,growright,gauge,noinfo
#Title[localhost.mem]: Memoria Libre
#MaxBytes[localhost.mem]: 1000000
#kMG[localhost.mem]: k,M,G,T,P,X
#YLegend[localhost.mem]: bytes
#ShortLegend[localhost.mem]: bytes
#LegendI[localhost.mem]: Free Memory:
#LegendO[localhost.mem]:
#Legend1[localhost.mem]: Free memory, not including swap, in bytes
#
#Memoria SWAP:
#LoadMIBs: /usr/share/snmp/mibs/UCD-SNMP-MIB.txt
#Target[localhost.swap]: memAvailSwap.0&memAvailSwap.0:public@localhost
#PageTop[localhost.swap]: Memoria Swap
#Options[localhost.swap]: nopercent,growright,gauge,noinfo
#Title[localhost.swap]: Memoria Libre
#MaxBytes[localhost.swap]: 1000000
#kMG[localhost.swap]: k,M,G,T,P,X
#YLegend[localhost.swap]: bytes
#ShortLegend[localhost.swap]: bytes
#LegendI[localhost.swap]: Memoria Libre:
#LegendO[localhost.swap]:
#Legend1[localhost.swap]: Swap memory avail, in bytes