Foros del Web » Administración de Sistemas » Unix / Linux »

Problema al Iniciar Linux

Estas en el tema de Problema al Iniciar Linux en el foro de Unix / Linux en Foros del Web. Hola, tengo una linux Slackware 12.2 y al iniciarlo me sucede los siguiente (esto esta sacado de dmesg) intel8x0_measure_ac97_clock: measured 52401 usecs intel8x0: clocking to ...
  #1 (permalink)  
Antiguo 20/07/2009, 12:54
Avatar de codeman1234  
Fecha de Ingreso: marzo-2008
Mensajes: 545
Antigüedad: 16 años, 2 meses
Puntos: 2
Pregunta Problema al Iniciar Linux

Hola,

tengo una linux Slackware 12.2 y al iniciarlo me sucede los siguiente (esto esta sacado de dmesg)



intel8x0_measure_ac97_clock: measured 52401 usecs
intel8x0: clocking to 48000
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
Clocksource tsc unstable (delta = 4686992589 ns)
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: weird block size 0
hda: default to 2kb block size
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
Adding 20956784k swap on /dev/sdb2. Priority:-1 extents:1 across:20956784k
fuse init (API version 7.9)
EXT3 FS on sdb3, internal journal
lp0: using parport0 (interrupt-driven).
lp0: console ready



Por lo que entiendo el hda es mi DVDRW por lo siguiente:

hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20

No hay nada en el DVDRW, intento desabiliatarlo en la BIOS y me hace lo mismo...

alguna idea de como solucionarlo??


Saludos y gracias!!
  #2 (permalink)  
Antiguo 20/07/2009, 14:35
Avatar de codeman1234  
Fecha de Ingreso: marzo-2008
Mensajes: 545
Antigüedad: 16 años, 2 meses
Puntos: 2
Respuesta: Problema al Iniciar Linux

alguna idea?
  #3 (permalink)  
Antiguo 20/07/2009, 23:03
Avatar de AleSanchez
Colaborador
 
Fecha de Ingreso: septiembre-2004
Ubicación: Buenos Aires, Argentina
Mensajes: 3.692
Antigüedad: 19 años, 8 meses
Puntos: 47
Respuesta: Problema al Iniciar Linux

No vas a conseguir respuestas en dos horas. Espera a que alguien conteste.
Prueba desconectar físicamente la lectora de DVD, y ver si sigue el problema (Quizás se esté refiriendo al disco rígido)

Saludos.
__________________
¡Volviendo a la programación!
  #4 (permalink)  
Antiguo 21/07/2009, 16:55
Avatar de codeman1234  
Fecha de Ingreso: marzo-2008
Mensajes: 545
Antigüedad: 16 años, 2 meses
Puntos: 2
Respuesta: Problema al Iniciar Linux

Cita:
Iniciado por AleSanchez Ver Mensaje
No vas a conseguir respuestas en dos horas. Espera a que alguien conteste.
Prueba desconectar físicamente la lectora de DVD, y ver si sigue el problema (Quizás se esté refiriendo al disco rígido)

Saludos.
Hola AleSanchez,

gracias por responder, La he desconectado y funciona perfectamente asi que no se refiere al disco rigido. Entonces que solucion puedo darle?? como hago para montar la lectora de DVD desde el inicio de Linux?

Saludos
  #5 (permalink)  
Antiguo 21/07/2009, 19:31
Avatar de AleSanchez
Colaborador
 
Fecha de Ingreso: septiembre-2004
Ubicación: Buenos Aires, Argentina
Mensajes: 3.692
Antigüedad: 19 años, 8 meses
Puntos: 47
Respuesta: Problema al Iniciar Linux

Ese error es muy probable que sea un problema físico o bien de la lectora misma, o fijate si no tenias un CD o DVD defectuoso dentro de la lectora.
__________________
¡Volviendo a la programación!
  #6 (permalink)  
Antiguo 23/07/2009, 07:10
Avatar de codeman1234  
Fecha de Ingreso: marzo-2008
Mensajes: 545
Antigüedad: 16 años, 2 meses
Puntos: 2
Respuesta: Problema al Iniciar Linux

Cita:
Iniciado por AleSanchez Ver Mensaje
Ese error es muy probable que sea un problema físico o bien de la lectora misma, o fijate si no tenias un CD o DVD defectuoso dentro de la lectora.
El DVDRW esta vacio, intente ponerle Cds de Linux y arranca perfectamente del CD, Peliculas y musica las lee una vez q monte los cds... q otra cosa puede ser?

Salu2
  #7 (permalink)  
Antiguo 01/09/2009, 07:54
Avatar de codeman1234  
Fecha de Ingreso: marzo-2008
Mensajes: 545
Antigüedad: 16 años, 2 meses
Puntos: 2
Respuesta: Problema al Iniciar Linux

Os comento sigo con el mismo problema con mi grabadora de DVD he estado mirando por google y preguntando gente y diferentes foros pero nadie sabe responderme ni consigo dar con la solucion de este problema. Al iniciar mi debian (acabo de volver de Slack a Debian) me sale lo siguiente:

intel8x0_measure_ac97_clock: measured 52401 usecs
intel8x0: clocking to 48000
hda: DMA timeout retry
hda: timeout waiting for DMA
hda: status timeout: status=0xd0 { Busy }
ide
: failed opcode was: unknown
hda: drive not ready for command
Clocksource tsc unstable (delta = 4686992589 ns)
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: weird block size 0
hda: default to 2kb block size
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command
hda: status timeout: status=0xd0 { Busy }
ide: failed opcode was: unknown
hda: drive not ready for command

El hda es mi Grabadora de DVD y nose porque dice que mi DVDRW no esta lista para recibir el comando. El problema por lo que he podido leer es que el DMA de la grabadora nunca llega a iniciarse y por eso me sale este error. Lo que queria saber es como hago para crear un script que se inicie con linux para que el DMA este OFF de la grabadora y que ni intente buscarlo. No se si me explico bien. Lo que quiero es que mi grabadora empieze en modo PIO y no DMA asi no me da este error.

He intentado mil cosas desde actualizar el firmware de la grabadora y de la BIOS de mi PC, cambiado los cables. Lo raro es que en windows funciona perfectamente no tengo este error para nada. En linux al iniciarlo no me detecta la grabadora es como si el SO desistiese de la grabadora porque no recibe respuesta.

Otro detalle cuando la desconecto del todo (quitandole la alimentacion) ese error no me sale osea q es la grabadora.

He probado instalar Debian, Slackware, Fedora, Ubuntu, OpenSuse y Mint y en todas las distribuciones de linux me pasa lo mismo.

Alguien sabe como puedo hacer para que siempre inicie en modo PIO y no modo DMA?

saludos y gracias
  #8 (permalink)  
Antiguo 01/09/2009, 20:12
Avatar de codeman1234  
Fecha de Ingreso: marzo-2008
Mensajes: 545
Antigüedad: 16 años, 2 meses
Puntos: 2
Respuesta: Problema al Iniciar Linux

me han dicho por ahi que para desconectar el modo DMA tengo que poner en el archivo de mi grub (grub: en el fichero /boot/grub/menu.lst) poner nodma. Eso es cierto?? pero en que parte del archivo deberia ponerlo?? os pongo aqui mi archivo menu.lst ... haber si alguien es capaz de ayudarme a resolver este dilema.

salu2 y gracias.


# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not change this entry to 'saved' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 5

# Pretty colours
color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=/dev/sdb2 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd1,1)

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(single-user) single
# altoptions=(single-user mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Debian GNU/Linux, kernel 2.6.30-1-686
root (hd1,1)
kernel /boot/vmlinuz-2.6.30-1-686 root=/dev/sdb2 ro quiet nodma
initrd /boot/initrd.img-2.6.30-1-686

title Debian GNU/Linux, kernel 2.6.30-1-686 (single-user mode)
root (hd1,1)
kernel /boot/vmlinuz-2.6.30-1-686 root=/dev/sdb2 ro single
initrd /boot/initrd.img-2.6.30-1-686

title Debian GNU/Linux, kernel 2.6.26-2-686
root (hd1,1)
kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/sdb2 ro quiet
initrd /boot/initrd.img-2.6.26-2-686

title Debian GNU/Linux, kernel 2.6.26-2-686 (single-user mode)
root (hd1,1)
kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/sdb2 ro single
initrd /boot/initrd.img-2.6.26-2-686

### END DEBIAN AUTOMAGIC KERNELS LIST

# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root

# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Professional
root (hd0,0)
savedefault
makeactive
chainloader +1
  #9 (permalink)  
Antiguo 01/09/2009, 20:12
Avatar de codeman1234  
Fecha de Ingreso: marzo-2008
Mensajes: 545
Antigüedad: 16 años, 2 meses
Puntos: 2
Respuesta: Problema al Iniciar Linux

Alguien entiende mi problema? Alguien sabe como puedo hacer para que mi Debian arranque en modo PIO (NODMA)??? Asi no me da mas este fallo??



Salu2

Última edición por codeman1234; 03/09/2009 a las 08:07
  #10 (permalink)  
Antiguo 12/11/2009, 15:23
Avatar de codeman1234  
Fecha de Ingreso: marzo-2008
Mensajes: 545
Antigüedad: 16 años, 2 meses
Puntos: 2
Respuesta: Problema al Iniciar Linux

SOLUCIONADO

Solo para a quien le pase lo mismo les cuento que la nueva version del kernel 2.6.31.6 en debian lenny te arregla este problema con el DMA de mi grabadora. Asi que si os pasa actualizar al ultimo kernel, desde que lo hice no tengo mas este problema.

Saludos y gracias por la ayuda
Atención: Estás leyendo un tema que no tiene actividad desde hace más de 6 MESES, te recomendamos abrir un Nuevo tema en lugar de responder al actual.
Respuesta




La zona horaria es GMT -6. Ahora son las 22:55.