problema con resolucion pantalla ubuntu

ibme74 · #1 (**permalink**) 21/12/2005, 20:48

He instalado ubuntu con windows xp se ha instalado correctamente
pero no me deja cambiar la resolucion que aparece a 640x400
He reconfigurado el xorg.conf pero no funciona. Sigo sin poder cambiar
la resolucion.

¿Alguna idea?

Koveart · #2 (**permalink**) 21/12/2005, 20:56

Intentalo con

dpkg-reconfigure sxerver-sorg

Saludos

ibme74 · #3 (**permalink**) 21/12/2005, 21:27

Gracias por responder Koveart.

Pero ya he probado con dpkg-reconfigure xserver-xorg
y no da resultado, cambio las resoluciones pero al reiniciar solo
me permite 640x480.

Koveart · #4 (**permalink**) 21/12/2005, 21:43

¿Tienes algun componente adicional ola tarjeta integrada?

Saludos

ibme74 · #5 (**permalink**) 21/12/2005, 21:46

Supongo que esta integrada, no he añadido ningun componente adicional que yo sepa

Koveart · #6 (**permalink**) 21/12/2005, 21:55

¿EStas seguro que has seleccionado el hardware correcto con dpkg-reconfigure? intenta reconcoer el hardware con algun live-cd que tengas a mano.

Saludos

mncarbone · #7 (**permalink**) 17/10/2006, 20:28

Ayuda!!! IBME74, yo tengo exactamente el mismo problema y probe de todo!!!
si logras slucionarlo por favor mandame un mail a mncarbone @yahoo.com.ar!!!

AleSanchez · #8 (**permalink**) 17/10/2006, 22:58

Mmm, me parece que no es asi como funciona al menos, este foro.
Publica en un tema nuevo tu problema, dinos EXACTAMENTE que has probado, y dinos EXACTAMENTE que mensajes de error has obtenido.
Saludos.

Tk421 · #9 (**permalink**) 18/10/2006, 02:43

Yo, por mi parte , le pido lo siguiente:

Postea la salida del siguiente comando:

Código:

lspci

Postea el contenido del siguietne archivo:

Código:

/etc/X11/xorg.conf

Postea la salida del siguiente comando:

Código:

dmesg

Ahora ya tenemos algo con lo que empezar a diagnosticar ...

SIEGFRIED_11 · #10 (**permalink**) 01/12/2007, 13:07

Bueno pues a mi parecer casi ningun foro a ayudado con este problema pues a mucha gente le sucede incluyendome todos te dan la solucion de

dpkg-reconfigure xserver-xorg

O el modificar el archivo xorg.conf a pie pero es cierto esto suele arreglarlo pero no con todo los tipos de monitor ademas que todos brindan ayuda cuando es una targeta de video pero no cuando es integrada, para un servidor que compre me da este problema el monitor es un Benq V551 y targeta integrada, ya utilice la opciones mencionadas antes pero no han dado resultado la resolucion aun me queda en 640x480 aunque en el xorg.conf dice 1024x768

Tuve una pequeña esperanza con este documento que encontre

http://www.ubunteate.es/blog/cambiar-la-resolucion-en-gnome/

pero el problema es que no encontre el menu grafico que menciona ahi entonces si alguien me puede dar una buena respuesta que me diga esto realmente me funciono que me lo diga gracias

-Defero- · #11 (**permalink**) 01/12/2007, 13:33

A otro usuario le han pedido información de LSPCI, XORG.CONF y DMESG. Prueba a aportar tú esa información. Y cuéntanos un poco más de tu hardware. No basta con saber que la tarjeta es integrada, necesitamos saber el modelo exacto.

SIEGFRIED_11 · #12 (**permalink**) 01/12/2007, 15:09

Pues bueno te puedo decir que es un HP Netserver LH3

La tarjeta Intel i960

Es un Pentium III

No se que mas necesitas para ayudarme con esto ?

He probado casi todo lo que salen en los foros, y lo mas comun es lo que mencione anteriormente, no se si sabran como ayudarme

Este es mi archivo xorg.conf

Section "Screen"
Identifier "Default Screen"
Device "Cirrus Logic GD 5446"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection

-Defero- · #13 (**permalink**) 01/12/2007, 15:14

Relee mi mensaje, porque te he pedido información que aún no me has dado. Y si pones el XORG.CONF, ponlo entero. Se me olvidaba: di también qué modelo EXACTO es el monitor.

arthpix · #14 (**permalink**) 01/12/2007, 18:09

Si, por ejemplo en el pedazo de xorg.conf que posteas no aparece el modelo de tarjeta.... Una de los montones de posibles causas del error es que no tengas asignado el driver que corresponde a tu tarjeta.
.
.
.
.
.
.
Pero no somos magos, brujos o adivinos.... Sin la información correcta y completa no es posible resolver algo.

Saludos

informaticadiaz · #15 (**permalink**) 19/05/2008, 13:21

Cita:

Iniciado por Tk421

Yo, por mi parte , le pido lo siguiente:

Postea la salida del siguiente comando:

Código:

lspci

Postea el contenido del siguietne archivo:

Código:

/etc/X11/xorg.conf

Postea la salida del siguiente comando:

Código:

dmesg

Ahora ya tenemos algo con lo que empezar a diagnosticar ...

con respecto a este póst me uno a la causa no al copy and paste
mucha gente dedica tiempo en ayudar a los demas sin embargo la idea es dar soluciones no divagar.
Como usuario de internet que soy desde hace cuatro años estoy cansado del contenido chatarra.
Y creo que mucha gente piensa igual que yo.
Una buena comunidad tendria que apoyarse en una buena base.
saludos a todos hagamos las cosas bien

lspci

Código:

00:00.0 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. K8M800 Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800/K8T890 South]
00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: VIA Technologies, Inc. S3 Unichrome Pro VGA Adapter (rev 01)

informaticadiaz · #16 (**permalink**) 19/05/2008, 13:23

/etc/X11/xorg.con

Código:

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by failsafeDexconf, using
# values from the debconf database and some overrides to use vesa mode.
#
# You should use dexconf or another such tool for creating a "real" xorg.conf
# For example:
#   sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "latam"
    Option        "XkbOptions"    "lv3:ralt_switch"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
EndSection

Section "Device"
    Identifier    "Configured Video Device"
    Boardname    "vesa"
    Busid        "PCI:1:0:0"
    Driver        "vesa"
    Screen    0
EndSection

Section "Monitor"
    Identifier    "Configured Monitor"
    Vendorname    "Samsung"
    Modelname    "Samsung SyncMaster 793S/793V/CM173G"
    Horizsync    30-71
    Vertrefresh    50-160
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
  modeline  "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
  modeline  "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
  modeline  "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
  modeline  "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
  modeline  "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
  modeline  "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
  modeline  "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
  modeline  "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
  modeline  "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
  modeline  "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
  modeline  "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
    Gamma    1.0
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "Configured Video Device"
    Monitor        "Configured Monitor"
    Defaultdepth    24
    SubSection "Display"
        Depth    24
        Virtual    1400    1050
        Modes        "1024x768@43"    "1152x864@75"    "1024x768@60"    "1280x960@60"    "1024x768@70"    "1280x1024@60"    "1024x768@75"    "1400x1050@60"    "1024x768@85"    "832x624@75"    "800x600@60"    "800x600@85"    "800x600@75"    "800x600@72"    "800x600@56"    "640x480@85"    "640x480@75"    "640x480@72"    "640x480@60"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
  screen 0 "Default Screen" 0 0
EndSection
Section "Module"
    Load        "glx"
    Load        "GLcore"
    Load        "v4l"
EndSection
Section "ServerFlags"
EndSection

informaticadiaz · #17 (**permalink**) 19/05/2008, 13:25

dmesg

Código:

[    0.000000] Linux version 2.6.24-16-generic (buildd@yellow) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Thu Apr 10 12:47:45 UTC 2008 (Ubuntu 2.6.24-16.30-generic)
[    0.000000] Command line: root=UUID=02106c70-fb0e-49f1-9358-05c97f83d589 ro quiet splash
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
[    0.000000]  BIOS-e820: 000000001bef0000 - 000000001bf00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 114416) 1 entries of 3200 used
[    0.000000] end_pfn_map = 1048576
[    0.000000] DMI 2.3 present.
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] CPU has 1 num_cores
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000001bef0000
[    0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[    0.000000] Entering add_active_range(0, 256, 114416) 1 entries of 3200 used
[    0.000000] Bootmem setup node 0 0000000000000000-000000001bef0000
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   DMA32        4096 ->  1048576
[    0.000000]   Normal    1048576 ->  1048576
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0:        0 ->      159
[    0.000000]     0:      256 ->   114416
[    0.000000] On node 0 totalpages: 114319
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1207 pages reserved
[    0.000000]   DMA zone: 2736 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1508 pages used for memmap
[    0.000000]   DMA32 zone: 108812 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000] MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] I/O APIC #2 at 0xFEC00000.
[    0.000000] Setting APIC routing to flat
[    0.000000] Processors: 1
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 20000000 (gap: 1bf00000:e2d00000)
[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PERCPU: Allocating 34656 bytes of per cpu data
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 111548
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=UUID=02106c70-fb0e-49f1-9358-05c97f83d589 ro quiet splash
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[    0.000000] TSC calibrated against PIT
[    0.000000] time.c: Detected 1999.793 MHz processor.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] Checking aperture...
[    0.000000] CPU 0: aperture @ e8000000 size 128 MB
[    0.000000] Memory: 437868k/457664k available (2466k kernel code, 19408k reserved, 1309k data, 316k init)
[    0.000000] SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[    0.000000] Calibrating delay using timer specific routine.. 4004.35 BogoMIPS (lpj=8008718)
[    0.000000] Security Framework initialized
[    0.000000] SELinux:  Disabled at boot.
[    0.000000] AppArmor: AppArmor initialized
[    0.000000] Failure registering capabilities with primary security module.
[    0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.000000] Mount-cache hash table entries: 256
[    0.000000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.000000] CPU: L2 Cache: 256K (64 bytes/line)
[    0.000000] CPU 0/0 -> Node 0
[    0.000000] SMP alternatives: switching to UP code
[    0.000000] Freeing SMP alternatives: 24k freed
[    0.000000] Early unpacking initramfs... done
[    0.000000] ACPI: Core revision 20070126
[    0.000000] ACPI Exception (tbxface-0629): AE_NO_ACPI_TABLES, While loading namespace from ACPI tables [20070126]
[    0.000000] ACPI: Unable to load the System Description Tables
[    0.000000] Using local APIC timer interrupts.
[    0.000000] APIC timer calibration result 12498704
[    0.000000] Detected 12.498 MHz APIC timer.
[    0.000000] Brought up 1 CPUs
[    0.000000] CPU0 attaching sched-domain:
[    0.000000]  domain 0: span 01
[    0.000000]   groups: 01
[    0.000000] net_namespace: 120 bytes
[    0.000000] Time: 18:28:50  Date: 05/19/08
[    0.000000] NET: Registered protocol family 16
[    0.000000] PCI: Using configuration type 1
[    0.000000] ACPI: Interpreter disabled.
[    0.000000] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.000000] pnp: PnP ACPI: disabled
[    0.000000] PCI: Probing PCI hardware
[    0.000000] PCI: Probing PCI hardware (bus 00)
[    0.000000] PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0
[    0.000000] PCI->APIC IRQ transform: 0000:00:0f.0[B] -> IRQ 20
[    0.000000] PCI->APIC IRQ transform: 0000:00:0f.1[A] -> IRQ 20
[    0.000000] PCI->APIC IRQ transform: 0000:00:10.0[A] -> IRQ 21
[    0.000000] PCI->APIC IRQ transform: 0000:00:10.1[A] -> IRQ 21
[    0.000000] PCI->APIC IRQ transform: 0000:00:10.2[B] -> IRQ 21
[    0.000000] PCI->APIC IRQ transform: 0000:00:10.3[B] -> IRQ 21
[    0.000000] PCI->APIC IRQ transform: 0000:00:10.4[C] -> IRQ 21
[    0.000000] PCI->APIC IRQ transform: 0000:00:11.5[C] -> IRQ 22
[    0.000000] PCI->APIC IRQ transform: 0000:00:12.0[A] -> IRQ 23
[    0.000000] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16
[    0.000000] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[    0.000000] NET: Registered protocol family 8
[    0.000000] NET: Registered protocol family 20
[    0.000000] agpgart: Detected AGP bridge 0
[    0.000000] agpgart: AGP aperture is 128M @ 0xe8000000
[    0.000000] AppArmor: AppArmor Filesystem Enabled
[    0.000000] PCI: Bridge: 0000:00:01.0
[    0.000000]   IO window: disabled.
[    0.000000]   MEM window: f4000000-f5ffffff
[    0.000000]   PREFETCH window: f0000000-f3ffffff
[    0.000000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[    0.000000] NET: Registered protocol family 2
[    0.000000] Time: tsc clocksource has been installed.
[    0.000000] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.000000] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.000000] TCP: Hash tables configured (established 16384 bind 16384)
[    0.000000] TCP reno registered
[    0.000000] checking if image is initramfs... it is
[    0.000000] Freeing initrd memory: 8211k freed
[    0.000000] audit: initializing netlink socket (disabled)
[    0.000000] audit(1211221730.172:1): initialized
[    0.000000] VFS: Disk quotas dquot_6.5.1
[    0.000000] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.000000] io scheduler noop registered
[    0.000000] io scheduler anticipatory registered
[    0.000000] io scheduler deadline registered
[    0.000000] io scheduler cfq registered (default)
[    0.000000] PCI: VIA PCI bridge detected. Disabling DAC.
[    0.000000] Boot video device is 0000:01:00.0
[    0.000000] Real Time Clock Driver v1.12ac
[    0.000000] Linux agpgart interface v0.102
[    0.000000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[    0.000000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.000000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

informaticadiaz · #18 (**permalink**) 19/05/2008, 13:27

[ 0.000000] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.000000] PNP: No PS/2 controller found. Probing ports directly.
[ 0.000000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.000000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.000000] mice: PS/2 mouse device common for all mice
[ 0.000000] cpuidle: using governor ladder
[ 0.000000] cpuidle: using governor menu
[ 0.000000] NET: Registered protocol family 1
[ 0.000000] registered taskstats version 1
[ 0.000000] Magic number: 8:257:494
[ 0.000000] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 0.000000] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.000000] EDD information not available.
[ 0.000000] Freeing unused kernel memory: 316k freed
[ 0.000000] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.000000] fuse init (API version 7.9)
[ 0.000000] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 0.000000] SCSI subsystem initialized
[ 0.000000] libata version 3.00 loaded.
[ 0.000000] usbcore: registered new interface driver usbfs
[ 0.000000] usbcore: registered new interface driver hub
[ 0.000000] usbcore: registered new device driver usb
[ 0.000000] pata_via 0000:00:0f.1: version 0.3.3
[ 0.000000] scsi0 : pata_via
[ 0.000000] scsi1 : pata_via
[ 0.000000] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xdf00 irq 14
[ 0.000000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xdf08 irq 15
[ 0.000000] USB Universal Host Controller Interface driver v3.0
[ 0.000000] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 0.000000] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 0.000000] ata1.01: ATAPI: ATAPI DVD A DH20A3H, YP5U, max UDMA/66
[ 0.000000] ata1.01: configured for UDMA/66
[ 0.000000] scsi 0:0:1:0: CD-ROM ATAPI DVD A DH20A3H YP5U PQ: 0 ANSI: 5
[ 0.000000] sata_via 0000:00:0f.0: version 2.3
[ 0.000000] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 0.000000] scsi2 : sata_via
[ 0.000000] scsi3 : sata_via
[ 0.000000] ata3: SATA max UDMA/133 cmd 0xde00 ctl 0xe400 bmdma 0xdd00 irq 20
[ 0.000000] ata4: SATA max UDMA/133 cmd 0xe500 ctl 0xdc00 bmdma 0xdd08 irq 20
[ 0.000000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.000000] ata3.00: ATA-7: WDC WD1600AABS-61PRA0, 05.06H05, max UDMA/133
[ 0.000000] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.000000] ata3.00: configured for UDMA/133
[ 0.000000] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 0.000000] scsi 2:0:0:0: Direct-Access ATA WDC WD1600AABS-6 05.0 PQ: 0 ANSI: 5
[ 0.000000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.000000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 0.000000] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000
[ 0.000000] usb usb1: configuration #1 chosen from 1 choice
[ 0.000000] hub 1-0:1.0: USB hub found
[ 0.000000] hub 1-0:1.0: 2 ports detected
[ 0.000000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.000000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 0.000000] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e100
[ 0.000000] usb usb2: configuration #1 chosen from 1 choice
[ 0.000000] hub 2-0:1.0: USB hub found
[ 0.000000] hub 2-0:1.0: 2 ports detected
[ 0.000000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.000000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 0.000000] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e200
[ 0.000000] usb usb3: configuration #1 chosen from 1 choice
[ 0.000000] hub 3-0:1.0: USB hub found
[ 0.000000] hub 3-0:1.0: 2 ports detected
[ 0.000000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.000000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 0.000000] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e300
[ 0.000000] usb usb4: configuration #1 chosen from 1 choice
[ 0.000000] hub 4-0:1.0: USB hub found
[ 0.000000] hub 4-0:1.0: 2 ports detected
[ 0.000000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.000000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 0.000000] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf6000000
[ 0.000000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 0.000000] usb usb5: configuration #1 chosen from 1 choice
[ 0.000000] hub 5-0:1.0: USB hub found
[ 0.000000] hub 5-0:1.0: 8 ports detected
[ 0.000000] eth0: VIA Rhine II at 0xf6001000, 00:e0:4d:41:53:e2, IRQ 23.
[ 0.000000] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[ 0.000000] Driver 'sr' needs updating - please use bus_type methods
[ 0.000000] Driver 'sd' needs updating - please use bus_type methods
[ 0.000000] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.000000] Uniform CD-ROM driver Revision: 3.20
[ 0.000000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 0.000000] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 0.000000] sd 2:0:0:0: [sda] Write Protect is off
[ 0.000000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.000000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.000000] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 0.000000] sd 2:0:0:0: [sda] Write Protect is off
[ 0.000000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.000000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.000000] sda: sda1 sda2 <<5>sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 0.000000] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.000000] sda5 >
[ 0.000000] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.000000] Attempting manual resume
[ 0.000000] swsusp: Resume From Partition 8:5
[ 0.000000] PM: Checking swsusp image.
[ 0.000000] PM: Resume from disk failed.
[ 0.000000] kjournald starting. Commit interval 5 seconds
[ 0.000000] EXT3-fs: mounted filesystem with ordered data mode.
[ 0.000000] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 0.000000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.000000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.000000] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 0.000000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 0.000000] parport0: PC-style at 0x378 [PCSPP,TRISTATE]
[ 0.000000] lp0: using parport0 (polling).
[ 0.000000] Adding 1301224k swap on /dev/sda5. Priority:-1 extents:1 across:1301224k
[ 0.000000] EXT3 FS on sda1, internal journal
[ 0.000000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.000000] powernow_k8: Unknown symbol acpi_processor_notify_smm
[ 0.000000] powernow_k8: Unknown symbol acpi_processor_unregister_performance
[ 0.000000] powernow_k8: Unknown symbol acpi_processor_register_performance
[ 0.000000] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[ 0.000000] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[ 0.000000] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[ 0.000000] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[ 0.000000] ppdev: user-space parallel port driver
[ 0.000000] audit(1211221748.845:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4299 profile="/usr/sbin/cupsd" namespace="default"
[ 0.000000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 0.000000] Bluetooth: Core ver 2.11
[ 0.000000] NET: Registered protocol family 31
[ 0.000000] Bluetooth: HCI device and connection manager initialized
[ 0.000000] Bluetooth: HCI socket layer initialized
[ 0.000000] Bluetooth: L2CAP ver 2.9
[ 0.000000] Bluetooth: L2CAP socket layer initialized
[ 0.000000] Bluetooth: RFCOMM socket layer initialized
[ 0.000000] Bluetooth: RFCOMM TTY layer initialized
[ 0.000000] Bluetooth: RFCOMM ver 1.8
[ 0.000000] [drm] Initialized drm 1.1.0 20060810
[ 0.000000] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 0.000000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 0.000000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 0.000000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 0.000000] NET: Registered protocol family 17
[ 0.000000] NET: Registered protocol family 10
[ 0.000000] lo: Disabled Privacy Extensions
[ 0.000000] eth0: no IPv6 routers presen[/CODE]

el post esta dividido en tres por su grab tamaño saludos

informaticadiaz · #19 (**permalink**) 19/05/2008, 13:28

[ 0.000000] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.000000] PNP: No PS/2 controller found. Probing ports directly.
[ 0.000000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.000000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.000000] mice: PS/2 mouse device common for all mice
[ 0.000000] cpuidle: using governor ladder
[ 0.000000] cpuidle: using governor menu
[ 0.000000] NET: Registered protocol family 1
[ 0.000000] registered taskstats version 1
[ 0.000000] Magic number: 8:257:494
[ 0.000000] /build/buildd/linux-2.6.24/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 0.000000] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.000000] EDD information not available.
[ 0.000000] Freeing unused kernel memory: 316k freed
[ 0.000000] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.000000] fuse init (API version 7.9)
[ 0.000000] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 0.000000] SCSI subsystem initialized
[ 0.000000] libata version 3.00 loaded.
[ 0.000000] usbcore: registered new interface driver usbfs
[ 0.000000] usbcore: registered new interface driver hub
[ 0.000000] usbcore: registered new device driver usb
[ 0.000000] pata_via 0000:00:0f.1: version 0.3.3
[ 0.000000] scsi0 : pata_via
[ 0.000000] scsi1 : pata_via
[ 0.000000] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xdf00 irq 14
[ 0.000000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xdf08 irq 15
[ 0.000000] USB Universal Host Controller Interface driver v3.0
[ 0.000000] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 0.000000] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 0.000000] ata1.01: ATAPI: ATAPI DVD A DH20A3H, YP5U, max UDMA/66
[ 0.000000] ata1.01: configured for UDMA/66
[ 0.000000] scsi 0:0:1:0: CD-ROM ATAPI DVD A DH20A3H YP5U PQ: 0 ANSI: 5
[ 0.000000] sata_via 0000:00:0f.0: version 2.3
[ 0.000000] sata_via 0000:00:0f.0: routed to hard irq line 11
[ 0.000000] scsi2 : sata_via
[ 0.000000] scsi3 : sata_via
[ 0.000000] ata3: SATA max UDMA/133 cmd 0xde00 ctl 0xe400 bmdma 0xdd00 irq 20
[ 0.000000] ata4: SATA max UDMA/133 cmd 0xe500 ctl 0xdc00 bmdma 0xdd08 irq 20
[ 0.000000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.000000] ata3.00: ATA-7: WDC WD1600AABS-61PRA0, 05.06H05, max UDMA/133
[ 0.000000] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 0.000000] ata3.00: configured for UDMA/133
[ 0.000000] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 0.000000] scsi 2:0:0:0: Direct-Access ATA WDC WD1600AABS-6 05.0 PQ: 0 ANSI: 5
[ 0.000000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 0.000000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 0.000000] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000
[ 0.000000] usb usb1: configuration #1 chosen from 1 choice
[ 0.000000] hub 1-0:1.0: USB hub found
[ 0.000000] hub 1-0:1.0: 2 ports detected
[ 0.000000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 0.000000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[ 0.000000] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e100
[ 0.000000] usb usb2: configuration #1 chosen from 1 choice
[ 0.000000] hub 2-0:1.0: USB hub found
[ 0.000000] hub 2-0:1.0: 2 ports detected
[ 0.000000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 0.000000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[ 0.000000] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e200
[ 0.000000] usb usb3: configuration #1 chosen from 1 choice
[ 0.000000] hub 3-0:1.0: USB hub found
[ 0.000000] hub 3-0:1.0: 2 ports detected
[ 0.000000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 0.000000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[ 0.000000] uhci_hcd 0000:00:10.3: irq 21, io base 0x0000e300
[ 0.000000] usb usb4: configuration #1 chosen from 1 choice
[ 0.000000] hub 4-0:1.0: USB hub found
[ 0.000000] hub 4-0:1.0: 2 ports detected
[ 0.000000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 0.000000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[ 0.000000] ehci_hcd 0000:00:10.4: irq 21, io mem 0xf6000000
[ 0.000000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 0.000000] usb usb5: configuration #1 chosen from 1 choice
[ 0.000000] hub 5-0:1.0: USB hub found
[ 0.000000] hub 5-0:1.0: 8 ports detected
[ 0.000000] eth0: VIA Rhine II at 0xf6001000, 00:e0:4d:41:53:e2, IRQ 23.
[ 0.000000] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
[ 0.000000] Driver 'sr' needs updating - please use bus_type methods
[ 0.000000] Driver 'sd' needs updating - please use bus_type methods
[ 0.000000] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.000000] Uniform CD-ROM driver Revision: 3.20
[ 0.000000] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 0.000000] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 0.000000] sd 2:0:0:0: [sda] Write Protect is off
[ 0.000000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.000000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.000000] sd 2:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 0.000000] sd 2:0:0:0: [sda] Write Protect is off
[ 0.000000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.000000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.000000] sda: sda1 sda2 <<5>sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 0.000000] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 0.000000] sda5 >
[ 0.000000] sd 2:0:0:0: [sda] Attached SCSI disk
[ 0.000000] Attempting manual resume
[ 0.000000] swsusp: Resume From Partition 8:5
[ 0.000000] PM: Checking swsusp image.
[ 0.000000] PM: Resume from disk failed.
[ 0.000000] kjournald starting. Commit interval 5 seconds
[ 0.000000] EXT3-fs: mounted filesystem with ordered data mode.
[ 0.000000] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 0.000000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.000000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 0.000000] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input3
[ 0.000000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 0.000000] parport0: PC-style at 0x378 [PCSPP,TRISTATE]
[ 0.000000] lp0: using parport0 (polling).
[ 0.000000] Adding 1301224k swap on /dev/sda5. Priority:-1 extents:1 across:1301224k
[ 0.000000] EXT3 FS on sda1, internal journal
[ 0.000000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.000000] powernow_k8: Unknown symbol acpi_processor_notify_smm
[ 0.000000] powernow_k8: Unknown symbol acpi_processor_unregister_performance
[ 0.000000] powernow_k8: Unknown symbol acpi_processor_register_performance
[ 0.000000] acpi_cpufreq: Unknown symbol acpi_processor_notify_smm
[ 0.000000] acpi_cpufreq: Unknown symbol acpi_processor_unregister_performance
[ 0.000000] acpi_cpufreq: Unknown symbol acpi_processor_preregister_performance
[ 0.000000] acpi_cpufreq: Unknown symbol acpi_processor_register_performance
[ 0.000000] ppdev: user-space parallel port driver
[ 0.000000] audit(1211221748.845:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4299 profile="/usr/sbin/cupsd" namespace="default"
[ 0.000000] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 0.000000] Bluetooth: Core ver 2.11
[ 0.000000] NET: Registered protocol family 31
[ 0.000000] Bluetooth: HCI device and connection manager initialized
[ 0.000000] Bluetooth: HCI socket layer initialized
[ 0.000000] Bluetooth: L2CAP ver 2.9
[ 0.000000] Bluetooth: L2CAP socket layer initialized
[ 0.000000] Bluetooth: RFCOMM socket layer initialized
[ 0.000000] Bluetooth: RFCOMM TTY layer initialized
[ 0.000000] Bluetooth: RFCOMM ver 1.8
[ 0.000000] [drm] Initialized drm 1.1.0 20060810
[ 0.000000] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 0.000000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 0.000000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 0.000000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 0.000000] NET: Registered protocol family 17
[ 0.000000] NET: Registered protocol family 10
[ 0.000000] lo: Disabled Privacy Extensions
[ 0.000000] eth0: no IPv6 routers presen[/CODE]

el post esta dividido en tres por su grab tamaño saludos

Joe_H · #20 (**permalink**) 14/01/2010, 18:57

Visita este link http://www.ubuntu-es.org/?q=node/120245, es para 9.10, no he probado lo que dicen aca en versiones anteriores, pero resolvi el problema en 5 m sin tener muchos conocimientos de linux... MUY BUENO, ESA ES LA VERDAD!!!!